Help with other topics
Frequently Asked Questions
Have a question about a recent order or a non-product-specific question?
This is likely solar burn — over time the device can develop small dots from sun exposure. The dots are cosmetic and should not affect performance. If solar burn becomes substantial enough to interfere with the viewing area, contact Bushnell Golf Support for options.
The display has 4 levels of brightness you can choose from. To change the brightness level press and hold the mode button on the side of the L7. Keep holding the mode button until it starts cycling through the brightness levels. "BRT1 to BRT4". When your preferred setting is displayed, press the power/fire button.
The L7 can be used to measure distance in yards or meters. The unit measure indicators are located in the lower right portion of the LCD. To select between yards and meters, press and hold the Mode button on the side of the L7. Press the Power/Fire button to confirm your unit's preference and exit the Settings menu. The L7 will return to the last unit of measure setting used each time the unit is turned on.
Power the unit on by pressing the Power/Fire button once, then rotate the eyepiece in either direction until the display icons and numbers are in focus.
Yes, the L7 is waterproof.
Yes, follow these steps.
1. Blow away any excessive dust or debris on exterior (or use a soft brush).
2. To remove dirt or finger prints, clean with the supplied micro fiber cloth rubbing in a circular motion. Use of a coarse cloth or unnecessary rubbing may scratch the lens surface and eventually cause permanent damage. The included washable microfiber cleaning cloth is ideal for the routine cleaning of your optics. Simply breathe lightly on the lens to provide a slight amount of moisture, then gently rub the lens with the microfiber cloth.
3. For a more thorough cleaning, photographic lens tissue and photographic-type lens cleaning fluid or isopropyl alcohol may be used. Always apply fluid to the cleaning cloth - never directly on the lens.
Replace the battery when the unit won't turn on, the display doesn't illuminate, or the display goes blank when firing the laser. Use a quality CR2 3-volt lithium battery, inserted negative (flat) end first. We recommend replacing the battery at least every six months.