Product Support

Tour Pro X2 Support

Getting started, FAQs, manuals, and warranty details for the Pro X2 Laser Rangefinder (Product #s: 201740, 201740CST).

Bushnell Pro X2 Laser Rangefinder Support

Getting Started

Two minutes of setup before your first round.

PRO X2 SETUP

Please register your device on bushnellgolf.com. This registration is for receiving Bushnell Golf support, product discounts,  and new product information.

Next, install the Bushnell Golf App on your phone. The Bushnell Golf App can be found by searching your phone's app store or via the below links.  

Open the Bushnell Golf App and add your rangefinder as a device. 

  1. The first field is the serial number from the bottom of the device.
  2. The 2nd field is the manufacture date that is also on the bottom of your rangefinder in YYYYMM format.
  3. If you get an error that the serial number is already in use, you will need to e-mail iGolf at support@l1inc.com  requesting the serial number be released.  Please include your serial number from your rangefinder with this e-mail.

Registration through the Golf app also creates your user ID and password at the Bushnell iGolf website https://bushnell.igolf.com/. This will be the website for software and course updates. Laser rangefinders don't really need software updates. 

Your initial battery should last for a few months. If you start to experience any issues with the performance, replace the battery with a high quality (Panasonic, Duracell, or Energizer), CR-2 3 Volt Lithium battery that is right out of the package. Once you replace the battery, press & hold the fire button for 10 seconds. We recommend carrying at least 1-2 spares in your golf bag so that you always have a fresh new battery for full functionality.

Guides & Manuals

PDF downloads open in a new tab.

Pro X2 User Manual

Download PDF
2 Years Warranty

Bushnell Golf guarantees the Pro X2 Laser Rangefinder to be free of defects in materials and workmanship for two years from the date of purchase. This warranty does not cover consumer-caused damages such as misuse, abuse or repairs attempted by someone other than our authorized technicians.

Warranty & Service Center →

FAQs

Troubleshooting and care, answered. Still stuck? The contact options below reach a real Bushnell Golf expert.

I see debris in the lens
This is likely solar burn — over time the device can develop small dots from sun exposure. The dots are cosmetic and should not affect performance. If solar burn becomes substantial enough to interfere with the viewing area, contact Bushnell Golf Support for options.
The display is out of focus
Power the unit on by pressing the Power/Fire button once, then rotate the eyepiece in either direction until the display icons and numbers are in focus.
My Pro X2 is off by 10 yards?
The Pro X2 can be used to measure distance in yards or meters. The unit measure indicators are located in the lower right portion of the LCD. To select between yards and meters, press and hold the Mode button (B Logo) on the side of the Pro X2. Press the Power/Fire button to confirm your unit’s preference and exit the Settings menu. The Pro X2 will return to the last unit of measure setting used each time the unit is turned on.
Is the Pro X2 Waterproof?
Yes, the Pro X2 is waterproof.
Can I clean the Pro X2?
Yes, follow these steps.
Blow away any excessive dust or debris on exterior (or use a soft brush).
To remove dirt or finger prints, clean with the supplied micro fiber cloth rubbing in a circular motion. Use of a coarse cloth or unnecessary rubbing may scratch the lens surface and eventually cause permanent damage. The included washable microfiber cleaning cloth is ideal for the routine cleaning of your optics. Simply breathe lightly on the lens to provide a slight amount of moisture, then gently rub the lens with the microfiber cloth.
For a more thorough cleaning, photographic lens tissue and photographic-type lens cleaning fluid or isopropyl alcohol may be used. Always apply fluid to the cleaning cloth - never directly on the lens.
When do I replace the battery?
Replace the battery when the unit won't turn on, the display doesn't illuminate, or the display goes blank when firing the laser. Use a quality CR2 3-volt lithium battery, inserted negative (flat) end first. We recommend replacing the battery at least every six months.

Replacement Parts

Replacement Parts
REPLACEMENT EYE CUP FOR PRO X2
Official replacement eye cup for the Pro X2.

Warranty & Service

Check coverage, request a warranty evaluation, or track a service.

Warranty center

Talk to an expert

Can't find what you need? Our support team replies within 24–48 hours.

Contact us

Legacy product manuals

Own an older Bushnell Golf device? Every manual, in one library.

Browse manuals