Bushnell Tour V4 Rangefinder Support & FAQ

Getting Started

Two minutes of setup before your first round.

Before use

Register your device at bushnellgolf.com/product-registration for Bushnell Golf support, product discounts, and new product information.

Next, install the Bushnell Golf App (Android / Apple).

Open the Bushnell Golf App and add your rangefinder as a device:

The first field is the serial number from the bottom of the device.
The second field is the manufacture date (also on the bottom of the rangefinder), in YYYYMM format.
If you get an error that the serial number is already in use, email iGolf at support@l1inc.com to request the serial number be released (include your serial number).

Basic operation

Registration through the Golf App also creates your user ID and password at the Bushnell iGolf website (bushnell.igolf.com), which is where you'll get software and course updates. Laser rangefinders generally don't need software updates.

Your initial battery should last a few months. If performance drops, replace it with a high-quality (Panasonic, Duracell, or Energizer) CR-2 3-volt lithium battery straight from the package, then press and hold the Fire button for 10 seconds. Carry 1-2 spares in your bag so you always have a fresh battery for full functionality.

Guides & Manuals

PDF downloads open in a new tab.

Tour V4 User Manual

The Tour V4 is a lightweight laser rangefinder with PinSeeker and JOLT technology. This owner's manual covers setup, features, settings, and care.

Download PDF

2 years Warranty

Bushnell Golf guarantees the Tour V4 to be free of defects in materials and workmanship for two years from the date of purchase. Consumer-caused damage - misuse, abuse, or repairs attempted outside our authorized technicians - is not covered.

Warranty & Service Center →

FAQs

Troubleshooting and care, answered. Still stuck? The contact options below reach a real Bushnell Golf expert.

I see debris in the lens

This is likely solar burn — over time the device can develop small dots from sun exposure. The dots are cosmetic and should not affect performance. If solar burn becomes substantial enough to interfere with the viewing area, contact Bushnell Golf Support for options.

My Tour V4 is off by 10 yards?

The Tour V4 can be used to measure distance in yards or meters. The unit measure indicators are located in the lower right portion of the LCD. To select between yards and meters (starting with the unit power off), press and hold the Power/Fire button. After 7 seconds, the display will begin to cycle through the options: Yards or meters. When the units you want are displayed, release the Power/Fire button to select it. Y for Yards or M for Meters. The Tour V4 will return to the last unit of measure setting used each time the unit is turned on.

The display is out of focus

Power the unit on by pressing the Power/Fire button once, then rotate the eyepiece in either direction until the display icons and numbers are in focus.

Is the Tour V4 Waterproof?

No, the Tour V4 is water resistant, but should not be exposed to heavy rain or other direct streams of water and will not withstand submersion in water or other liquids. Damage caused by water is not covered under the two-year limited warranty.

Can I clean the Tour V4?

Yes, follow these steps.

1. Blow away any excessive dust or debris on exterior (or use a soft brush).

2. To remove dirt or finger prints, clean with the supplied micro fiber cloth rubbing in a circular motion. Use of a coarse cloth or unnecessary rubbing may scratch the lens surface and eventually cause permanent damage. The included washable microfiber cleaning cloth is ideal for the routine cleaning of your optics. Simply breathe lightly on the lens to provide a slight amount of moisture, then gently rub the lens with the microfiber cloth.

3. For a more thorough cleaning, photographic lens tissue and photographic-type lens cleaning fluid or isopropyl alcohol may be used. Always apply fluid to the cleaning cloth - never directly on the lens.

When do I replace the battery?

Replace the battery when the unit won't turn on, the display doesn't illuminate, or the display goes blank when firing the laser. Use a quality CR2 3-volt lithium battery, inserted negative (flat) end first. We recommend replacing the battery at least every six months.